If you need to replace the silicone gasket of the burner box you can make
one using high-temp silicone RTV gasket maker.  Smear the mating surfaces
and screws with a trace of Vaseline, initially insert the screws so the
thickness is a bit greater than the original gasket.  After it's cured for
a while tighten to original thickness.

But it doesn't matter if the original is ratty around the edges, it's only
where it seals that matters.+

Yrs,
d

On Fri, Jun 30, 2017 at 1:47 PM, David McNeely <davmcneely40@gmail.com>
wrote:

> Well, I have the refrigerator out again and the steel propane line from the
>