| Subject: | Re: Real time help needed |
| From: | Paul <paul_gordon@SYMPATICO.CA> |
| Date: | Sat, 28 Mar 2020 19:03:47 -0400 |
I will second that. Hall sensor, it happened to me. Only one of the reasons I installed a
2.5 ej.π
Sent from my iPhone
> On Mar 28, 2020, at 6:51 PM, Richard Koerner <rjkinpb@sbcglobal.net> wrote:
>
> The "turning into alley" part may be an important clue. Hit a bump....a marginal ring terminal which was already cracked and just holding together barely got jostled loose. Happened to me once while driving down the freeway in the middle of nowhere....hit a bump, red lights on dash, no good after that. It was the big red wire to the starter, but my van didn't crank or anything.
> That would be my suspicion.....bump broke something barely hanging together.
> Rich
> San Diego
>
> On Saturday, March 28, 2020, 3:33:51 PM PDT, Alistair Bell <albell@shaw.ca> wrote:
>
> Hi,
>
> Driving to work today, turn into alley and van dies. No sputter, just dead. Dash light come on.
>
> Cranks, no start.
>
> Fuel pump audible start and shut off. 3/4 tank gas
>
> Fuel pump and ecu relays in compartment clicking on power
>
> Rotor in dist seems fine
>
> Power to coil.
>
> Sure seems like ignition with the no warning death.
>
> Alone here so canβt do two man testing.
>
> I feel like Iβm missing something obvious
>
> Any help?
>
> Alistair